Plumbing- industrial - Import export

Our patented desuperheater TECtemp HT L lance cooler is suitable for applications at temperatures up to 750 °C due to non-moving parts in the steam flow. The three-part design makes it possible to bring the control unit with drive out of the high temperature area. The reduced weight of the steam lance has a positive effect on the support load of the steam line. The functional principle is based on the proved TECtemp desuperheater. The compact control unit can be removed easily and can be serviced individually for servicing work.

Our patented desuperheater TECtemp HT V venturi cooler is suitable for applications at temperatures up to 750 °C for small pipeline nominal diameters due to non-moving parts in the steam flow. The three-part design makes it possible to bring the control unit with drive out of the high temperature range. The functional principle is based on the proven TECtemp desuperheater. The compact control unit can be removed easily and can be serviced individually for servicing work. This desuperheater is used as a compact solution for small pipelines with a high number of nozzles and small pressure loss requirements.

Our variTEC ball valve is used for shut-off, control and safety functions (HIPPS). The ball valve provides universal possible applications for shut-off and/or regulation of the medium. This valve is suitable for almost every application due to the wide temperature range and the design with trunnion mounted ball, Double Piston Effect and Double-Block-and-Bleed function.

Our patented desuperheater TECtemp HT R ring cooler is designed with a three-part structure without moving parts and without weld seams in the steam lances. These are arranged in a ring shape depending on the steam pipe nominal diameter. For example. 40 individually controlled nozzles can be used in this way. Homogeneous distribution of the injection water makes short evaporation sections and minimal load of the steam pipe possible. The geometry of the steam lances acts like a venturi nozzle in the steam pipe which results in clearly reduced loss of pressure.

The patented TECsteam steam booster nozzle is used for cooling steam close to the saturated steam temperature or hot gases. The temperature is controlled by the injection of water into the steam or hot gas stream whereby the water is thermally atomised using high pressure steam. The high pressure steam is removed from and returned uncontrolled to the high pressure steam system. The temperature-dependent cooling water is supplied via a control valve. Extremely short evaporation sections of less than 3 m can be realised with this valve.

The TEC artec TECpress steam conversion station is a combination of pressure, quantity and temperature control. The subcritical controlled pressure release is integrated with the proven downstream temperature control systems into a complete solution. Due to different design versions, various applications such as turbine bypass stations or district heat extraction can be realised.

Brass or cast iron body Cast-iron operating square (30 x 30 mm) Nickel-coated brass ball

The GEMÜ R677 2/2-way diaphragm valve has a low maintenance plastic bonnet and is manually operated. An integral optical position indicator is standard. The High-Flow valve body provides compact dimensions at high flow rates. -Same mounting height planes over multiple nominal sizes -Compact plant design due to flow optimised valve bodies -Integral optical position indicator

The GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. A stainless steel bellows and a handwheel extension are available as options (not for operator size 0). —Various valve body connections (threaded sockets, threaded spigots, butt weld spigots) available —High flow rates due to angle seat design —Optionally for contact with foodstuffs as per directive (EC) No. 1935/20041 (K-no. 1935)

The GEMÜ 728 2/2-way metal ball valve is motorized. It has a plastic actuator housing. A manual override and an optical position indicator are integrated as standard. The seat is made of PTFE. — High flow rates — Full-flow bore

The GEMÜ 610 2/2-way diaphragm valve has a low maintenance plastic piston actuator and is pneumatically operated. An integral optical position indicator is standard. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. —Same mounting height planes over multiple nominal sizes —Compact plant design due to flow optimised valve bodies —Integral optical position indicator and seal adjuster as standard —Option with electrical position indicator and / or lock out device

The GEMÜ 498 PTFE seated butterfly valve is motorized. Various metal or plastic on/off or control actuators are available. Disc and shaft are one-piece, body and seat are available in different designs. The butterfly valve is available in nominal sizes DN 40 - 900 (1½? - 36?) and in wafer and lugged body versions. —Suitable for isolating and control functions with gaseous and liquid media —Seal material TFM™ (FDA 21CRF 177.1550) —Installation length acc. to ISO 5752/20, EN 558-1/20, JIS 10K

The modular GEMÜ 553 distribution valve comprises various globe valve modules. These can be equipped with manual or pneumatic operators. The downstream media is isolated using a PTFE seal. The valve spindle is sealed by a self-adjusting gland packing. This provides a low-maintenance and reliable valve spindle seal even after an extended period of operation. The wiper ring that is installed upstream of the gland packing also protects this against contamination and damage. The individual modules can be easily connected using screws. The seal on the connection flange and between the individual valve bodies has an FPM O-ring. Features: — Modular valve for distribution, mixing and collection applications — Freely extendable — Simple adaptation options — Diverse accessories — Simple integration of sensors — Outlets can be arranged in 90° steps — Compact design — Actuators can be easily replaced — Filters or separation of media can be easily integrated

The GEMÜ R690 2/2-way diaphragm valve has a low maintenance membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. The High-Flow valve body provides compact dimensions at high flow rates. —Same mounting height planes over multiple nominal sizes —Compact plant design due to flow optimised valve bodies —Reduced control air consumption —Varied optional accessories for measurement and control

The GEMÜ 620 2/2-way diaphragm valve has a low maintenance metal membrane actuator and is pneumatically operated. The valve is also suitable for high media temperatures up to 150 °C. —Insensitive to particulate media —High flow rates —Optional flow direction —Suitable for inert and corrosive liquid and gaseous media —PFA, PP or hard rubber lined (optional)

The GEMÜ 649 2/2-way diaphragm valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. An integral optical and electrical position indicator is standard. — Hermetic separation between medium and actuator — Installation for an optimised draining is possible — Open/close function, positioner and process controller — Variable force and speed — Diagnostic functions — Operable via web interface eSy-Web — Electrical and mechanical position indicator — Actuator can be positioned in 45° steps

The GEMÜ 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)

The GEMÜ 549 2/2-way angle seat globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)

As a very strong stockist in Turkey, our company offers all kinds of mechanical engineering & plumbing spare parts used in HVAC industry, with wide range of types, sizes to our domestic and worldwide customers, at very competitive prices and with fast delivery options directly from our large stock for export. Your very small orders are also welcome. Please contact us now to get fast reply. We offer a complete package, wide range of HVAC products directly from our huge stock in Turkey for export: Boilers (wall-hung domestic type boilers / industrial type gas boilers), panel radiators, towel warmers, electrical/gas water heaters (instantaneous water heaters, storage tank water heaters), air-conditioners, natural gas space heaters, gas heater fans, spare parts of boilers, plumbing equipment, plastic materials (plastic pipes, fittings), industrial boilers, expansion tanks, valve groups, heat exchangers, pump groups (circulation pumps, centrifuge pumps, dreinage pumps, heat pumps)

For installation into pipes to the protection of vessels and components against deflagration of flammable liquids and gases. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. The distance between a potential ignition source and the flame arrester must not exceed 50 times the inner pipe diameter. The installation of the Deflagration flame arrester into horizontal and vertical pipes is permissible. When equipped with one or two temperature sensors, the devices are protected under atmospheric conditions against a short time burning by a burning time tBT = 1.0 min. If only one temperature sensor, then it is to be placed on the device side where a burning could be expected.

To avoid the backflow of materials up to category 4 into the drinking water installation, the backflow preventer BA (acc. to DIN EN 1717 a “backflow preventer with a controllable middle pression area”) is used as an approved safety device.

High Quality , Durable backed with 50 year Warranty

It is characterized by good susceptibility to machining. It is very susceptible to hot forming and forging. It is widely used in the production of forged parts with complicated shapes parts for pipe fittings industrial terminals heating elements plumbing industrial fittings We also have other nonferrous materials on sale.

High performance pipe clamp for plumbing, ventilation, air conditioning and industrial application Excellent loading capacity Easy installation through wide opening High performance noise and vibration absorption Precise fitting for every pipe We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Brass side inlet tap MAIN CHARACTERISTICS - Brass body, compliant with standard NF EN 1216X - Cast iron operating square (30 x 30 mm) - Nickel-coated brass ball - Boss: male thread - Metric pitch (PB or GB) - PFA (Permissible Operating Pressure): 16 bar - PEA (Permissible Test Pressure): 24 bar

FIX LTD - local plumbing contractor offers professional plumbing services in Glasgow that You can count on. FIX LTD offer: heating system repair, boiler repair, mechanical drainage maintenance, sanitary fitting installations, central heating installations, complete replacement of the water installation, water heater installation. repair of a mechanical drainage system, full bathroom installation plumbing emergencies bath fitting and much more. Are You looking for a reliable contractor nearby? Call for FIX LTD today.

We offer a comprehensive central heating installation service. Whether your home is need of a brand-new central heating system, a few extra radiators or an upgrade to your existing system, we can help! With more than 10 years of experience in the heating and plumbing industry, we are experts in our field. We have the skills, know-how and capability to install new systems or perform upgrades to suit your needs. We pride ourselves on working professionally, quickly and cleanly to ensure your central heating installation is accomplished with minimal fuss and disruption to your home.