60 kVA Diesel Generator - DETROİT ENGİNE

A number one hit for years, the GFD165 is the smallest unit of the GF series. With a maximum of 160 kV and 5 mA, the GFD165 is a compact gas insulated unit designed for applications where size and weight matter. The GFD165 is the ideal machine for field applications where the unit needs to be frequently moved or inserted in tiny spaces. With regards to its 5mA and pulsed wave technology, the unit can penetrate medium to very thin materials, metallic or composites. It will easily surpass the poor contrast of Isotopes and will be a very good replacement in lower thickness ranges where Isotopes are generally not allowed. This unit uses the same driving electronic and technologies as the CERAM but is equipped with the standard well proven glass tube of Balteau NDT.

Since 1975 present in Europe with regenerated solvents and thinners, regenerated glycols and polyethylene glycols, solvents for bitumen, acids, end-of-season and non-standard products. We carry out filtrations, neutralizations, dehydrations and rectification of non-standard products. Our regenerates: acetone, acetic acid, formic acid, butyl acetate, ethyl acetate, isobutyl acetate, methyl acetate, methoxypropanol acetate, isobutanol, normalbutanol, sec-butanol, denatured isopropanol, methoxypropanol, methylene chloride, dichloropropane, chlorinated mixtures, dimethylformamide , dimethylacetamide, dibasic esters, butyl glycol, monoethylene glycol, diethylene glycol, triethylene glycol, dipropylene glycol, HCFC141b, MEK, MIBK, n-methyl-2-pyrrolidone, PEG 200, PEG 300, PEG 4000, perchlorethylene, polyols, naphtha solvent, denatured toluene, THF , trichlorethylene, denatured xylene.

The CSN® HECT, HEVT and HECT/VT by Schniewindt combines proven sensor technology and opticaldigital data transfer according to the standard IEC 6185092, creating a future orientated solution for applications in high voltage AC substations. The required values to be measured are recorded in analog signal form by conventional sensor elements (R/C high voltage divider for voltage measurement and Rogowski coil for current measurement) on HVline potential and transferred to the RemoteDataModule (RDM) mounted in the head construction of the instrument transformer. The RDM converts the recorded data into a digital serial protocol and transmits them via optical fiber to the Merging Unit (MU), located in the control room. The distance between instrument transformer and MU can be up to 1 km. The MU transfers the data protocol of three instrument transformers into the protocol according to IEC 6185092. For signal output